 |
» |
|
|
|
|
Materials
- 11 sheets of card stock
-
Cutting mat
- X-ACTO knife
- Metal-edge ruler
- Double-sided tape
-
Hole punch
-
Ribbon for binding
Instructions
- Print 1 copy of the colouring book front cover (page 1) onto card stock. Set aside to dry completely.
-
Print 3 copies of the colouring book back cover (page 2) onto card stock. Set them aside to dry completely.
- Place the cutting mat underneath one of the covers. Using the X-ACTO knife and the ruler as your guide, carefully trim the white areas away from the cover. Repeat for the remaining covers.
- Place the front cover and one of the back covers face down and apply double-sided tape to the backs. Orienting the covers in the same direction, place the remaining covers on top, being careful to align the edges of the covers.
- Press firmly in place.
- Print the inside pages of the colouring book (pages 3-9) onto card stock. Set aside to dry completely.
- Place the cutting mat underneath the one of the inside pages. Using the X-ACTO knife and the ruler as your guide, carefully trim the white areas away from the page. Repeat for the remaining pages.
- Stack the colouring book covers and inside pages together in order.
-
Punch holes along the spine as indicated on the front cover.
- Thread ribbon through the holes and tie with a bow to bind the pages together.
|
|
|
|
